AC CONDENSER

CAR AC CONDENSER REPLACEMENT

Buy used AC condenser for replacement for your car online at Mainland auto parts. We have the best high quality AC Condenser for all makes and models. The AC Condenser cost depends on the car models that you drive. Before you start searching for any  AC Condenser for your vehicles you should know what exactly the AC condenser is.

FIND A PART NOW

The air conditioning system in a car is made out of many components. Each component plays its own role and is bound to each other. One significant component in the AC system of a car is the condenser.

The condenser acts as a heat exchanger that is used to change high-pressure gas over high-pressure liquid, then gets steamed to the Receiver Dryer until it proceeds to the expansion valve.

FUNCTION OF AC CONDENSER

The condenser works to diminish the temperature of the refrigerant at the time of the condensation process. When the warm temperature is effectively lowered, a cool liquid will be formed which will be delivered through the car air conditioner holes.

Basically, the condenser will retain heat in the Freon that has been packed by the compressor and change the Freon as a gas into a liquid.

This condenser is commonly situated at the front of the car radiator. Considering the position, it is unavoidable that a lot of dirt might get into the vehicle and make the condenser dirty. Dirt that lands in the vehicle air conditioner condenser can ruin the process of condensation.

Considering its significant job, the car  ac condenser needs some extra attention. The point is to avoid the possibility of the condenser leaking, which will affect the heat of the cabin while driving at stopping or low speed.

HOW TO PREVENT AC CONDENSER FROM DAMAGE

The best way to prevent damage to the car air conditioner condenser is to support it intermittently. By performing routine checks every 3-6 months, the condition of the car condenser can be better kept up with maintenance.

You may likewise need  to make sure that the ac condenser is clean from dust and dirt. You can do this by washing it frequently with water. When spraying the condenser, the water pressure should be controlled properly: don’t be too hard so that the car condenser fins are not effectively imprinted.