What is Front Axle Assembly ?
Motor vehicles usually move forward by rolling on two or more tires. A front axle assembly is the unit that connects two wheels at the front of a vehicle, and allows those wheels to rotate freely and sometimes independently. Very simple front axle assembly models may not include much beyond the axle, axle housing, and bearings to allow the axle itself to rotate, while other assemblies that are more complex may include steering and suspension components. The primary purpose of the axle in most cases is to support the weight of the vehicle, but this is not always the case. If the front axle assembly is a drive axle, that unit will help deliver driving torque to the wheels. This means the transmission and engine will produce the energy and transfer it to the axle, which will have gears that rotate the axle shaft. Front wheel drive cars will feature such a front axle assembly, while rear wheel drive vehicles will not. On a rear wheel drive vehicle, the front axle may simply be a load-bearing and suspension component. It may still also feature steering components as well.
What Are the Different Axles?
Following are the three different types of axles:
- Rear Axles
- Front Axle
- Stub Axle
What are the components that make entire Drive Axle?
Axle : The drive axle is a crucial car component that extends out from the differential and into the tire. Typically, drive axles are encased within an axle housing, which offers the part more protection and allows it to operate much more efficiently.
Shaft (Drive Shaft) : It is common for the term “shaft” to be used interchangeably with “drive shaft,” “CV shaft” and “axle,” as it is a rotating rod within the axle’s housing responsible for transferring movement or torque throughout the assembly it was designed for. In most vehicles, a drive shaft is connected to the transmission on one end and the differential on the other.
Differential : A differential is a gearing found between each half shaft on the car axle that is connected to the wheel. The wheels on a vehicle traveling on any specific path must all travel at different lengths throughout the entirety of the journey. Since wheels operate in this way, it is necessary for each wheel to have the ability to rotate at a different speed from one another. Differentials allow each wheel to turn at a different speed.
CV Joint : Universal joints that connect the drive axle are called constant velocity joints. These joints are typically referred to as CV joints.
Front Drive Axle : A front drive axle relies on the power that is transmitted to it from the transfer case via the drive shaft to steer the wheels of a vehicle. Certain vehicles that utilize a front drive axle may have the differential housing set off center in the axle housing to allow the drive shaft to pass beside the engine oil pan and maintain adequate road clearance without excessive height at the front of the vehicle.
Rear Drive Axle : Rear drive axles are responsible for connecting the differential side gears to the drive wheels. Depending on the vehicle and the drive axle it utilizes, the rear drive axle may or may not be used to support the vehicle’s weight. Typically, they are manufactured with harder materials than other drive axle components, as this allows an increase in strength. Rear drive axles can be categorized into three types – semi-floating, full-floating, and three-quarter floating.
Two, Four And All-Wheel Drive Axle : It is common to mistake a four-wheel drive (4WD) axle configuration with an all-wheel drive (AWD) axle, as both configurations transfer power to the four wheels of a vehicle. Two-wheel drive (2WD) axle configurations, which can consist of either a front wheel drive (FWD) or rear wheel drive (RWD) axle setup, are more common in passenger vehicles. FWD is more common than RWD in passenger vehicles.
Drive Axle Boots : A drive axle boot is a rubber cover that protects the drive axle joint. They can be referred to as a CV boot as well. They are responsible for holding the grease CV joints require inside. Drive axle boots should be serviced routinely, as the rubber boots wear out over time. If a vehicle with a faulty drive axle boot is continuously operated, the CV joint on the CV axle could become severely damaged.
Drive Axle Service : When an axle bearing begins to create a loud and unusual sound, it is typically a sign that the rear axle requires servicing. Whether the axle is about to break or has completely broken, the rear axles must be removed from the vehicle to repair and replace the differential assembly.
The Cost of Axle Repair : As repairing and replacing an axle assembly on a vehicle can be challenging, it is advisable for drivers to allow a certified mechanic to perform the service. The cost of axle repair service will vary depending on the severity of the issue as well as the vehicle’s axle configuration.
Maintaining a Drive Axle : In addition to paying attention to the sounds a drive axle makes, as well as any fluid that may leak out of it, drivers must be aware of their vehicle’s weight limit. Overloading a vehicle will result damaging the drive axle.
There is only one answer to that question and that is Mainland Auto Parts LLC.
The largest Front Axle seller in United States. We stock up on millions of Front Axle Assembly for all brands including Ford, Chevy, GMC, Dodge, Jeep, Pontiac, Cadillac, Oldsmobile, Saturn, Lincoln , Volkswagen, BMW, Audi, Mercedes, Fiat, Jaguar, Land rover, Range rover, Volvo, Saab, Toyota, Honda, Suzuki, Acura, Lexus, Subaru etc.
That means Mainland Auto Parts LLC can get you the part shipped the fastest with the lowest prices being guaranteed.